JB Weld Steel Putty repair stock tank pool

How to Fix a Leak in Your Stock Tank Pool with JB Weld Steel Putty (Even Underwater!)

Is your stock tank pool leaking? No worries! Here's a quick and easy guide to sealing a leak with JB Weld Steel Putty , an ultra-strong epoxy paste that's ideal for galvanized steel and designed to be submersible .

✅ What you need:

• JB Weld Steel Putty (epoxy paste)

• A clean, dry cloth

• Disposable gloves (optional, but recommended)

• Sandpaper (optional, for an even smoother finish after application)

🔧 Simple steps to repair a leak:

1. Locate the leak
   Lightly fill your stock tank pool and locate the exact point where the water is leaking.

2. Clean the area
   Wipe around the leak to remove any dirt, dust or residue.
   (Tip: Although JB Weld paste is submersible, a clean surface ensures better adhesion.)

3. Prepare the epoxy paste

   • Cut a piece of JB Weld Steel Putty.

   • Knead it with your fingers for 1-2 minutes until you get a uniform color (the dough will heat up slightly, this is normal!).

4. Apply directly to the leak (outside or inside the pool)

   • Press the paste firmly onto the hole or cracked area.

   • Smooth the edges to seal well all around.
     (Yes, you can even apply it underwater if your pond is full!)

5. Let it harden

   • Initial setting time: 5 minutes .

   • Full cure: 1 hour for water resistance , 24 hours for maximum strength .

   • Sand if you want a smoother result afterwards.

6. Test and enjoy!
   Fill your stock tank pool and check: the leak is sealed. You're now ready to enjoy a worry-free pool.

💡 Good to know:

• A small leak does not make your pool unusable: many choose not to repair it!

• For a permanent and invisible repair , JB Weld Steel Putty is the optimal product.

• Compatible with galvanized steel, designed to last even when submerged in water.